XSagnsed
- class sherpa.astro.xspec.XSagnsed(name='agnsed')[source] [edit on github]
Bases:
XSAdditiveModel
The XSPEC agnsed model: AGN SED model
The model is described at [1].
- mass
The black hole mass, in solar units.
- dist
The comoving (proper) distance, in Mpc.
- logmdot
log of mdot, where mdot = Mdot/Mdot_Edd and eta Mdot_Edd c^2 = L_Edd
- astar
The black hole spin (dimensionless)
- cosi
The cosine of the inclination angle i for the warm Comptonising component and the outer disc.
- kTe_hot
The electron temperature for the hot Comptonisation component in keV. If negative then only the hot Comptonisation component is used.
- kTe_warm
The electron temperature for the warm Comptonisation component in keV. If negative then only the warm Comptonisation component is used.
- Gamma_hot
The spectral index of the hot Comptonisation component. If negative, the code will use the value calculated via eq.(2) of KD18 (see [1]).
- Gamma_warm
The spectral index of the warm Comptonisation component. If negative then only the outer disc component is used.
- R_hot
The outer radius of the hot Comptonisation component in Rg.
- R_warm
The outer radius of the warm Comptonisation component in Rg.
- logrout
The log of the outer radius of the disc in units of Rg. If negative, the code will use the self gravity radius as calculated from Laor & Netzer (1989) (see [1]).
- Htmax
The upper limit of the scale height for the hot Comptonisation component in Rg. If smaller than R_hot, the hot Comptonisation region is a sphere of radius Htmax by keeping Ldiss_hot determined by R_hot via eq.(2) of KD18 (see [1]).
- reprocess
If this parameter is 0, reprocessing is not considered. If it is 1, reprocessing is included.
- redshift
The redshift.
- norm
The normalization of the model.
See also
XSagnslim
,XSqsosed
References
Attributes Summary
The maximum size of the cache.
A one-dimensional model.
The hard maximum values for the thawed parameters.
The hard minimum values for the thawed parameters.
The maximum limits of the thawed parameters.
The minimum limits of the thawed parameters.
The thawed parameters of the model.
Methods Summary
apply
(outer, *otherargs, **otherkwargs)Clear the cache.
Display the cache status.
calc
(*args, **kwargs)Calculate the model given the parameters and grid.
freeze
()Freeze any thawed parameters of the model.
guess
(dep, *args, **kwargs)Set an initial guess for the parameter values.
regrid
(*args, **kwargs)The class RegriddableModel1D allows the user to evaluate in the requested space then interpolate onto the data space.
reset
()Reset the parameter values.
set_center
(*args, **kwargs)startup
([cache])Called before a model may be evaluated multiple times.
teardown
()Called after a model may be evaluated multiple times.
thaw
()Thaw any frozen parameters of the model.
Attributes Documentation
- cache = 5
The maximum size of the cache.
- ndim = 1
A one-dimensional model.
- thawedparhardmaxes
The hard maximum values for the thawed parameters.
The minimum and maximum range of the parameters can be changed with thawedparmins and thawedparmaxes but only within the range given by thawedparhardmins to thawparhardmaxes.
See also
- thawedparhardmins
The hard minimum values for the thawed parameters.
The minimum and maximum range of the parameters can be changed with thawedparmins and thawedparmaxes but only within the range given by thawedparhardmins to thawparhardmaxes.
See also
- thawedparmaxes
The maximum limits of the thawed parameters.
Get or set the maximum limits of the thawed parameters of the model as a list of numbers. If there are no thawed parameters then [] is used. The ordering matches that of the pars attribute.
See also
thawedpars
,thawedarhardmaxes
,thawedparmins
- thawedparmins
The minimum limits of the thawed parameters.
Get or set the minimum limits of the thawed parameters of the model as a list of numbers. If there are no thawed parameters then [] is used. The ordering matches that of the pars attribute.
See also
thawedpars
,thawedarhardmins
,thawedparmaxes
- thawedpars
The thawed parameters of the model.
Get or set the thawed parameters of the model as a list of numbers. If there are no thawed parameters then [] is used. The ordering matches that of the pars attribute.
See also
- version_enabled = True
Methods Documentation
- apply(outer, *otherargs, **otherkwargs) [edit on github]
- cache_clear() [edit on github]
Clear the cache.
- cache_status() [edit on github]
Display the cache status.
Information on the cache - the number of “hits”, “misses”, and “requests” - is displayed at the INFO logging level.
Example
>>> pl.cache_status() powlaw1d.pl size: 5 hits: 633 misses: 240 check= 873
- calc(*args, **kwargs) [edit on github]
Calculate the model given the parameters and grid.
Notes
XSPEC models must always be evaluated with low and high bin edges. Although supported by the XSPEC model interface the ability to evaluate using an XSPEC-style grid (n+1 values for n bins which we pad with a 0), we do not allow this here since it complicates the handling of the regrid method.
Keyword arguments are ignored.
- freeze() [edit on github]
Freeze any thawed parameters of the model.
- get_center() [edit on github]
- guess(dep, *args, **kwargs) [edit on github]
Set an initial guess for the parameter values.
Attempt to set the parameter values, and ranges, for the model to match the data values. This is intended as a rough guess, so it is expected that the model is only evaluated a small number of times, if at all.
- regrid(*args, **kwargs) [edit on github]
The class RegriddableModel1D allows the user to evaluate in the requested space then interpolate onto the data space. An optional argument ‘interp’ enables the user to change the interpolation method.
Examples
>>> import numpy as np >>> from sherpa.models.basic import Box1D >>> mybox = Box1D() >>> request_space = np.arange(1, 10, 0.1) >>> regrid_model = mybox.regrid(request_space, interp=linear_interp)
- reset() [edit on github]
Reset the parameter values.
Restores each parameter to the last value it was set to. This allows the parameters to be easily reset after a fit.
- set_center(*args, **kwargs) [edit on github]
- startup(cache=False) [edit on github]
Called before a model may be evaluated multiple times.
- Parameters:
cache (bool, optional) – Should a cache be used when evaluating the models.
See also
- teardown() [edit on github]
Called after a model may be evaluated multiple times.
See also
- thaw() [edit on github]
Thaw any frozen parameters of the model.
Those parameters that are marked as “always frozen” are skipped.